|
 |
 |
|
 |
|
The Extron DVI 201 Tx/Rx is a transmitter and receiver set that enables DVI Digital Visual Interface or HDMI High Definition Multimedia Interface signals to be carried over distances significantly greater than the specified 5 meter (15 foot) distance limitation for standard DVI cables. Linked together using two economical and integration friendly CAT 5, CAT 5e, or CAT 6 cables, the DVI 201 Tx and DVI 201 Rx work together to send single link DVI-D or HDMI signals over 200 feet (60 meters) for HDTV and XGA (1024 x 768).
The DVI 201 Tx/Rx supports the long distance transmission of HDTV signals with HDCP High-bandwidth Digital Content Protection for copy protection of future digital television broadcasts, as well as the high resolution digital video output from current and forthcoming DVD players. With the appropriate adapters from Extron, this DVI-D transmitter/receiver set is fully compatible with HDMI, a new digital video, audio, and control standard for consumer A/V products.
Several features facilitate convenient, streamlined system integration. The DVI 201 Tx transmitter includes a DVI loop-through to support monitoring on a local display device. RS-232 signals can be transmitted over the same cabling as the DVI signals for remote monitor or projector control. Furthermore, either the transmitter or receiver can be remotely powered over this cabling, so that external power is necessary for only one of the devices. The DVI 201 Tx and DVI 201 Rx receiver are housed in 1" high, quarter rack width metal enclosures.
- Input: DVI-D connector, 3.5 mm captive screw connector - DVI 201 Tx
- Outputs: DVI-D connector & 3.5 mm captive screw connector - DVI 201 Rx, local DVI-D output - DVI 201 Tx
- Transmits single link DVI-D/HDMI and RS-232 signals over two CAT 5/5e/6 cables
?Standard UTP cables provide an economical, easily installed cable solution.
- Sends HDTV and XGA signals (1024 x 768) over 200 feet (60 meters), UXGA signals (1600 x 1200) over 100 feet (30 meters)
- Local monitor output
?The DVI 201 Tx transmitter features a DVI-D output for connection to a local monitor.
- Supports DDC and HDCP copy protection transmission
?The DVI 201 Tx/Rx fully supports long distance transmission of the DDC and HDCP signals.
- DDC routing to local or remote display
?At the DVI 201 Tx, the DDC or HDCP signal is directed to either the local display or the remote display, depending on which is more critical in receiving the signal.
- Remote powering of transmitter or receiver
?Only one power supply is necessary to power both devices.
- Bi-directional RS-232 pass-through
?Bi-directional RS-232 control signals can be transmitted alongside the DVI or HDMI signal, so that the remote display can be controlled without the need for additional cabling.
- Fully supports HDMI signals when used with optional Extron HDMI-DVI adapters
?Supports CEC Consumer Electronics Control signal transmission.
- 1" high, quarter rack width metal enclosures
?With low profile enclosures, both devices can be discreetly installed, such as behind a plasma or LCD flat-panel display.
- External international power supply included, part # 70-055-01
| DVI 201 Tx/Rx DVI/HDMI Extender Series |
|
| Interconnection between transmitter and receiver |
| Connectors |
(2) RJ-45 per unit for 2 CAT5/5e/6 cables connecting the transmitter and receiver |
| Bit rate |
5 gigabits/second total (1.65 gigabits/second/color) |
| Signal transmission distance |
100' (30 m) with a 1600x1200 @ 60 Hz signal (the highest resolution of the single DVI standard)
200' (60 m) with an HDTV signal or a 1024x768 @ 60 Hz signal |
| NOTE |
|
The transmission distance varies greatly depending on the signal resolution and on the type of cable, graphic card, and display used in the system. | |
|
| Signal types and standards |
| Digital video |
RGB digital video (DVI and HDMI* standards), actively buffered
YCrCb digital component video (HDMI standard), actively buffered
(All single link DVI and HDMI* signal formats are supported including 640x480 @ 60 Hz through 1600x1200 @ 60 Hz computer video, and also 480p, 720p, 1080i, and 1080p HDTV signals) |
| HDCP |
HDCP (High-bandwidth Digital Content Protection) using the DVI and HDMI standards (for video, actively buffered, transmitted through DDC lines) |
| Digital audio |
HDMI* audio, actively buffered (transmitted through RGB and YCrCb lines) |
| RS-232 |
RS-232 serial data (pass-through) |
| CEC |
Consumer Electronics Control (CEC) wired infrared data using the HDMI standard (pass-through) |
| NOTE |
|
*An optional Extron HDMI to DVI adapter is required in order to transmit a CEC signal. | |
| EDID (DDC) |
EDID (Extended Display Identification Data) and DDC (display data channel) using DVI and HDMI* standards (actively buffered) |
| HPD |
HPD (Hot Plug Detection of display, pass-through) |
| |
|
|
| Video input and loop-through (DVI 201 Tx) |
| Number/signal type |
1 DVI-D/HDMI* input, 1600x1200 @ 60 Hz max. resolution
1 DVI-D/HDMI* local loop-through |
| Connectors |
2 DVI-D female |
|
| Video output (DVI 201 Rx) |
| Number/signal type |
1 DVI-D/HDMI*, 1600x1200 @ 60 Hz max. resolution |
| Connectors |
1 DVI-D female |
|
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.4 A for both transmitter and receiver |
| NOTE |
|
Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the CAT5/5e/6 cables. | |
| Temperature/humidity |
Storage: -40 to +158 캟 (-40 to +70 캜) / 10% to 90%, noncondensing
Operating: +32 to +122 캟 (0 to +50 캜) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01; 1U 6" deep rack shelf, part #60-190-10, 60-604-10; or VersaTools?rack shelf, part #60-190-20 or 60‑604‑20.
Also furniture mountable with optional Through-Desk Mounting Kit, #70-077-02, or attachable to a projector mount using optional kit #70-526-02. |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.) |
| Product weight |
0.5 lbs (0.3 kg) |
| Shipping weight |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
*An optional HDMI to DVI adapter is required if an HDMI signal is used. | |
| NOTE |
|
All nominal levels are at ?0%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
